The independent converter is a device with electronic provisions that allows at its entrance the continuous voltage and produces at its exit a stable electrical voltage of 230V and frequency of 50Hz. It is able to work conversely when the energy from the photovoltaic system is weak or the storage batteries are discharged. In other words, it accepts AC current and produces DC so that the batteries can charge from the alternating generators.
Some of the basic functions of a converter is the best possible output of the conversion even with not fully charged load, the highly possible overload at the start, the tolerance towards fluctuations of the battery’s voltage, and the safeguard against short circuits and high voltage.
One of the most important sections of a individual domestic system is the battery. The batteries are a delicate part of the system because they are the part of the system that will be replaced and are also the most expensive part of an independent system.
The choice of batteries may be the deciding factor after 10 years for the whole success of the system, that is why we always choose the most reliable and highest quality batteries.
The charge sensor is placed between the photovoltaic panel and the batteries, thus charging the batteries automatically. The electrical converter can charge the batteries also, if it is connected to the alternating current or in the case of a stand alone system or with your alternating current generator.
The well known Holland Inverter Victron Phoenix 600-5000VA is of the highest quality, pure sine and very high output. Victron Energy Inverters are characterized by the highest possible reliability in the most demanding circumstances. With the application of Hybrid HF Technology, these inverters are able to combine with success the highest grade of output and the ability to support, without problems, loads with high starting electrical needs. With the unique technology of SinusMax of Victron Energy, loads such as refrigerators, machines, etc., are no problem at all.
One of the best solutions for stand-alone photovoltaic systems.
Automatic charge regulators for the 12V and 24V systems at 10-20-30-40A. It executes all systems of a simple charge regulator in a more efficient way. This means that your battery is charged in the best way, guaranteeing a much longer life.
Automatic voltage converters with or without built-in alternating charger (inverter-charger) and automatic load switching. Quiet operation at every load, regulated operation stand-by.
One of the best solutions for independent photovoltaic systems.
